Hey y'all, first time poster here. I'm an amateur at soldering and wiring in general so I was wondering if i could get help on a mod for my HSS American Pro II strat. It's got some weird stuff I haven't seen on other 7 way switch mod schematics such as the 250k/500k dual pot, the treble bleeds, and the strange half super switch (?). I have attached fender's wiring diagram to this post, thanks everyone.
Adding 7 way switch mod to HSS American Pro II strat
- Thread starter gavinv116
- Start date
sjtalon
Most Honored Senior Member
Welcome to the forum!
Help how? What's your question?
Help how? What's your question?
Yeah of course, i’n specifically asking how i would go about addding a 7 way switch mod to this circuit either via a push pull in tone 1 or a mini toggle. I’ve been able to add such a mod to previous strats before, but the circuitry on this American Pro 2 HSS has components and wiring connections i am unfamiliar with (as i mentioned in the first post). Any wiring help would be appreciated
Skinny Nitro
Senior Stratmaster
Something like this should work. One side of the neck on switch is soldered to the neck pickup hot, the other to the output.
THANK YOU SO MUCH!
would it be different if i used a push pull switch instead of a mini toggle?
sjtalon
Most Honored Senior Member
Same.
With the p/p orientated in Skinny's picture with the knob on TOP (switch part below). Pull up on the knob, get the combo.
Use either VERTICLE row of terminals on the p/p switch.
With the p/p orientated in Skinny's picture with the knob on TOP (switch part below). Pull up on the knob, get the combo.
Use either VERTICLE row of terminals on the p/p switch.
